
A damaged sewer pipe sounds expensive enough without adding excavation into the equation. That's exactly why relining sewer pipes has become a popular repair method for homeowners looking into long-term drainage solutions.
So, before you start worrying about digging up your yard, let's look at what modern repair methods can achieve.
Experts at Vort Plumbing will take you through the key details, including how relining is performed and the situations where plumbers choose it instead of traditional pipe replacement.
Sewer pipe relining is a trenchless method of repairing a damaged underground line from the inside by inserting a resin-saturated liner and curing it in place to form a durable new pipe within the old one.
Also known as cured-in-place pipe lining (CIPP) or trenchless sewer repair, the process serves as the recognised industry standard for rehabilitating deteriorated infrastructure without digging up your property.
One major advantage is that plumbers can work through existing access points rather than digging long trenches across your property. As a result, roads, driveways, footpaths, lawns, and landscaped gardens can remain largely untouched throughout the repair.
Once cured, the liner forms a seamless structural pipe within the original line, reinforcing damaged sections and sealing defects that allow moisture infiltration.
A fully relined sewer can achieve a service life of up to 50 years while restoring the overall integrity of the drainage system.
Complete CIPP lining is commonly selected when deterioration extends across substantial sections of pipe. For isolated damage, plumbers may instead use a CIPP point repair to restore cracked sections or root intrusion spanning between 1.2 and 6 metres.
Based on our experts' experiences, both repair options deliver long-term pipe restoration without the substantial costs associated with open-cut replacement.
Let’s take a look at why sewer pipe relining has become such a common solution across Adelaide properties.
Most properties in inner and middle Adelaide suburbs like Norwood, Unley, and Colonel Light Gardens feature historic sandstone bungalows dating from the 1920s and 1930s.
During that period, glazed stoneware was widely used for underground drainage and sewer pipes as reticulated services expanded throughout the metropolitan area.
After decades underground, many of these ceramic pipes have reached the stage where cracking and joint separation are increasingly common.
Unlike modern pipe materials, terracotta and clay do not flex when surrounding ground conditions shift. Joint openings can then provide an easy entry point for moisture-seeking roots.
Faced with ageing pipework that still retains much of its original structure, many property owners view internal relining as a practical rehabilitation solution.
Ground conditions across metropolitan Adelaide place additional stress on underground drainage infrastructure.
Large sections of the region sit on reactive clay soils that expand when saturated and contract during prolonged dry periods.
Deep seasonal movement places continuous pressure on buried pipelines. Older earthenware pipes are particularly vulnerable because rigid materials struggle to accommodate shifting ground.
Cracked pipe walls, displaced joints, and localised structural movement can all develop as soil expands and contracts around the drainage network.
Established Adelaide suburbs contain large numbers of gum trees, Moreton Bay figs, and other mature species with extensive root systems.
South Australia is home to around 60 naturally occurring eucalypt varieties, many of which develop substantial underground root networks in search of moisture.
Escaping water vapour from a cracked sewer line can attract roots from surprising distances. Fine root filaments work their way through small fractures and separated joints before multiplying into dense masses inside the pipe.
You can identify an active pipeline breakdown by watching out for these common warning signs around your home:
All in all, spotting any of these active performance drops indicates your buried network requires a permanent physical barrier to replace short-term mechanical clearing sessions.

Here’s what happens during a typical sewer pipe relining project:
Before any repair work takes place, trade specialists send a high-definition waterproof camera through the damaged pipe to identify the exact location, type, and extent of the structural defects.
Conducting thorough CCTV drain camera inspections also allows operators to verify internal pipe dimensions and determine whether relining is a suitable solution.
For example, a fully collapsed mainline or an extensively crushed earthenware section generally requires physical excavation rather than an internal lining sleeve.
After reviewing the camera footage, the operator uses an electronic locator above ground to map the exact path and depth of the affected pipeline before installation equipment is brought into position.
Once the assessment is complete, the pipe relining service team thoroughly clean the existing sewer channel using high-pressure water jetting equipment.
Root masses, grease accumulation, mineral scale, and other obstructions must be removed before lining can proceed.
After cleaning, operators perform a second camera inspection to verify the surface is clear and suitable for lining.
Any protruding ceramic fragments or stubborn root stubs are then removed with specialised robotic cutting equipment to provide an unobstructed pathway through the pipe.
With the pipe prepared, technicians insert a flexible textile or felt liner saturated with premium epoxy resin through an existing inspection opening.
Resin-soaked material acts as a custom mould that conforms to the pipe's unique shape, bends, and connection points.
Next, an internal air bladder inflates the liner tightly against the existing sewer wall. You can think of the bladder as a long, high-pressure balloon that presses the resin-coated material firmly into position.
As pressure increases, the resin is forced into micro-cracks, separated joints, and fracture lines throughout the damaged section.
After the liner is fully positioned, steam, hot water, or specialised ultraviolet light is used to trigger the curing process. Heat or UV exposure activates a chemical reaction within the resin, transforming the flexible liner into a rigid structural pipe.
As curing progresses, the new liner hardens against the existing sewer wall and forms a seamless conduit within the original pipe. Existing cracks, holes, and joint defects are sealed during this stage, restoring structural integrity and near-new hydraulic performance.
After curing is complete, operators deploy a remote-controlled robotic cutter equipped with a diagnostic camera to reopen junctions connected to individual building service lines.
Continuous lining covers every internal opening along the repaired section, so each lateral connection must be carefully reinstated from inside the pipe.
A final CCTV inspection then verifies that the liner has cured correctly, service connections have been restored, and wastewater can move freely through the system.
Most residential relining projects require no backyard excavation and can be completed within a single day.
Choosing between modern trenchless restoration and traditional excavation depends entirely on the structural state of your buried utility lines.
So, the first step is understanding the exact condition of the affected pipe before selecting the most effective repair method.
The table below compares both approaches and highlights when each solution is typically recommended:
| Evaluation Factors | Trenchless Resin Lining | Full Excavation Replacement |
| Physical Condition Required | The underground pipe shell must remain structurally intact. | The system handles fully collapsed or crushed line profiles. |
| Property Layout Impact | Completed via access points, keeping gardens safe. | Requires a deep trench line through lawns or concrete. |
| Conduit Material Lifespan | Adds a brand-new, root-resistant 50-year PVC layer. | Drops in standard plastic pipes with new rubber seals. |
| Typical On-Site Duration | Finishes completely within a single working day. | Spans multiple days for digging and structural backfilling. |
With that in mind, even experienced plumbers avoid making recommendations without seeing the inside of the pipe first.
A high-definition CCTV drain inspection reveals the true condition of the line, so plumbers can determine whether a seamless internal liner can restore the pipe or whether excavation is necessary.

In general, homeowners are responsible for the private sewer line running from the house to the point where it connects with the public sewer network.
Any blockage, root intrusion, cracked pipe, leaking joint, or structural collapse within that private section is typically repaired at the owner's expense.
Public sewer mains running beneath roads and footpaths fall under the management of the local utility network. However, determining the exact boundary is not always as simple as looking at where the pipe sits on the property.
For that reason, many Adelaide homeowners check the SA Water Connections Estimator Map before proceeding with major drainage works. The map displays the location of the public sewer main along with the connection servicing your allotment.
Some properties also contain utility easements that permit access to underground sewer infrastructure for future maintenance work.
If excavation forms part of the proposed repair, checking service locations through Before You Dig Australia reduces the risk of striking buried utilities during construction.
Pipe relining is designed as a long term structural repair, not a temporary patch.
A professionally installed epoxy liner is generally rated to last 50 years or more, placing its lifespan on par with many traditional pipe replacement materials.
Part of that longevity comes from the liner itself. Once cured, the epoxy forms a rigid structural pipe within the existing line, with strength levels that can exceed the original clay, terracotta, or ageing metal pipe surrounding it.
A seamless internal surface also removes the joints and cracks that previously attracted tree roots. In addition, smoother pipe walls reduce sediment accumulation compared to older damaged pipes.
For Adelaide homeowners dealing with recurring root intrusion or ageing underground infrastructure, that durability provides a practical long term solution.
Instead of repeatedly repairing the same section of pipe, the relined sewer receives a new internal barrier engineered for decades of service.
Here are a few frequently asked questions to help you understand how relining sewer pipes work and when it may be the right solution.
No. While relining works perfectly on clay, PVC, and cast iron, it is impossible to execute if a pipe has entirely collapsed, lost its structural shape, or shifted significantly out of alignment.
Generally, you are looking at roughly $400 to $1,000+ per linear metre around Adelaide.
The final figure varies according to how easily technicians can access the pipe, the length of the relining section, and the number of lateral junctions requiring robotic cutting after installation.
In many cases, no. Standard policies generally exclude damage caused by wear and tear, ageing pipes, or tree root intrusion.
Some insurers may provide cover when burst or leaking pipes cause sudden and unexpected damage to the property. Coverage for the pipe repair itself varies between policies, so we suggest checking the terms of your insurance before proceeding.
No, you can stay inside your property during the installation process.
However, technicians will request that you strictly limit your water usage. That means you cannot flush toilets, run the washing machine, or take showers while the structural lining cures.
Technically yes, but only by a couple of millimetres.
Because the new epoxy surface is incredibly slick, it will improve overall flow capacity and block waste material from catching.
Opting for modern sewer pipe relining methods seals out aggressive tree root networks without turning your property into an open construction zone.
This trenchless tech allows you to repair pipes running beneath your house, driveways, or concrete slabs where digging is simply too disruptive.
If you want to clear your drainage lines without tearing up your lawn, the team at Vort Plumbing is ready to step in! Our crew uses high-pressure jetting and high-definition cameras to pinpoint subsurface faults, so call us today for your free quote and $0 call-out fee.

